HURACAN Dry Vac Air Cleaning Gun

Huracan Dry Vac Air Cleaning Gun

The Huracan Dry Vac Air Cleaning Gun pairs compressed-air power with a vacuum attachment for fast and efficient cleaning. Using a spiral wave principle, high-pressure air is converted into kinetic energy and expands at the outlet to greatly increase power and reach.

Why You Will Love It

• Vacuum-assisted cleaning pulls away dust and debris as you blow it loose.
• Accurate, controlled airflow targets tight seams, vents, tracks, and crevices.
• Fast results on interiors and engine-bay tight areas with minimal dwell time.
• Durable build designed for daily shop use.

Where It Works

• Automotive: seats, instrument panels, door panels, carpets, floor mats, vents, seat rails, engine tight areas.
• Shops and industry: construction, mining, and factory environments with heavy dust build-up.

How To Use

1. Connect the gun to a clean, dry compressed-air line and attach your vacuum hose to the vacuum port.
2. Start at low pressure, then increase as needed for the surface and soil level.
3. Hold the tip a few inches from the surface and sweep debris toward the vacuum inlet for capture.
4. Use short trigger pulls around delicate switches, screens, stitching, and sensors.
5. Empty the vacuum canister and run a brief burst of clean air through the gun to clear the tube and tip.

Pro Tip

For fabric and carpet, you can pre-treat the surface with a suitable APC (such as a light dilution of MAVERICK APC), agitate with a soft brush, then use the Dry Vac Air Cleaning Gun to lift and extract loosened soils. Do not run liquid through the air line.

Safety: Wear eye and hearing protection. Do not direct airflow at skin. Verify your vacuum hose and fittings are secure before use.