XCON Water Spot & Fallout Remover

XCON — Water Spot & Mineral Deposit Remover

XCON quickly dissolves hard water spots, mineral deposits (calcium/lime), and related buildup on paint and glass, restoring a clean, uniform surface that’s ready for polishing or protection.

What XCON Does

• Breaks down mineral-bound contamination that regular washing can’t remove.
• Speeds prep before compounding, sealing, or ceramic coating.
• Targets problem areas on glass and glossy exterior plastics when used as directed.

Where to Use It

• Automotive paint, exterior glass, glossy non-porous plastics.
• Avoid hot panels or direct sun. Do not use on bare/polished aluminum or other sensitive, uncoated metals. Always spot-test first.

Directions

1. Wash and dry the vehicle first.
2. Work on a cool surface. Spray XCON onto the panel (or onto a microfiber for controlled application).
3. For water spots: gently work the area until deposits dissolve, then wipe clean.
4. For heavier mineral buildup: allow a brief dwell (~3 minutes) while monitoring, then rinse thoroughly. Do not let product dry.
5. Follow with a pH-neutral wash or rinseless wipe-down to neutralize residues.

Safety & Care

• Acidic chemistry — wear gloves/eye protection.
• Do not use on hot surfaces or in direct sun. Do not allow to dry.
• Rinse tools and towels after use. Always test in an inconspicuous area first.

Pairs Well With

• ROGUE — Touchless Alkaline Pre-Wash — strips road film before XCON so mineral treatment works faster and safer.
• SYNERGY — Rinseless Wash Concentrate — quick neutralizing wipe-down when working indoors or in low-water situations.
• PURGE — Iron & Fallout Remover (HI-CON) — complements XCON by targeting iron contamination after mineral removal.

Good to Know

Keep a dedicated set of microfibers for acidic products and replace them regularly. For severe etching or long-set water spots, follow with polishing after XCON.